Super NOVA S REDLINE Series Professional CO2 Laser Cutter & Engraver

SUPERNOVA 10 S
SUPERNOVA 10 S
SUPERNOVA 14 S
SUPERNOVA 14 S
SUPERNOVA 16 S
SUPERNOVA 16 S

Starts at $22,495

Product information

Product information

Product information

Product information

Class 1 laser

Class 1 laser

Class 1 laser

Class 1 laser

Super Clean Pack Design

Super Clean Pack Design

Super Clean Pack Design

Super Clean Pack Design

Leadshine AC Servos | Clear Path DC Servos (signature)

Leadshine AC Servos | Clear Path DC Servos (signature)

Leadshine AC Servos | Clear Path DC Servos (signature)

Leadshine AC Servos | Clear Path DC Servos (signature)

Built-in water cooling system, exhaust fan, and air assist pump

Built-in water cooling system, exhaust fan, and air assist pump

Built-in water cooling system, exhaust fan, and air assist pump

Built-in water cooling system, exhaust fan, and air assist pump

Max. acceleration 5G (DC) / 8G (RF)

Max. acceleration 5G (DC) / 8G (RF)

Max. acceleration 5G (DC) / 8G (RF)

Max. acceleration 5G (DC) / 8G (RF)

Max. speed 1200 mm/s (DC glass) | 4200 mm/s (RF Metal) | 5000 mm/s (signature)

Max. speed 1200 mm/s (DC glass) | 4200 mm/s (RF Metal) | 5000 mm/s (signature)

Max. speed 1200 mm/s (DC glass) | 4200 mm/s (RF Metal) | 5000 mm/s (signature)

Max. speed 1200 mm/s (DC glass) | 4200 mm/s (RF Metal) | 5000 mm/s (signature)

Material goes through the door

Material goes through the door

Material goes through the door

Material goes through the door

Z-dybde op til 7-7/8" (200 mm)

Z-dybde op til 7-7/8" (200 mm)

Z-dybde op til 7-7/8" (200 mm)

Z-dybde op til 7-7/8" (200 mm)

Get instant prices. No email required.

Get prices

Get prices

Get prices

Get prices

Features

Specs

Up to 8G acceleration

Full AC servo motors provide nearly instantaneous acceleration with 8G force and top speeds of 4,200 mm/sec across all RF models.

Excellent precision

Linear guide rails with ball bearings provide greater precision and smoother movements, which improves print quality and lifespan.

Lightweight laser head

A lightweight laser head contributes to less overscanning and a general reduction in vibrations.

Robust Unibody

Most lasers use a unibody structure where the components are bolted to a thin outer shell. However, if you require speed, it is extremely important to make the frame as rigid as possible to prevent the machine from bending. The frame in the Redline series is so robust that you can even remove the entire side panel for greater accessibility during troubleshooting.

All-in-one design

The MIRA series now joins the NOVAs with its Super Clean Pack design. Not only are the linear rails and rental blocks enclosed, but protective curtains on the left and right side rails now prevent unwanted particles from spreading into your workspace. Centrifugal fans have been replaced by quieter and easier-to-clean inline fans.

Modular pipe docking station

Quickly switch between tubes with higher or lower wattage as needed with the modular tube docking station. This tool-free design allows you to switch between different wavelengths on all models, such as 1064nm fiber lasers. This opens up a whole new world of possibilities by expanding the range of materials that can be processed while delivering results of the highest quality.

High resolution camera

All Aeon lasers are now equipped with built-in high-resolution cameras for precise positioning and monitoring.

Integrated autofocus

Say goodbye to collisions and hollowed-out material. The Aeon Redline series features a redesigned laser head with integrated autofocus.

Material passes through

For the Redline series, the design team was finally able to include an endless front-to-back review in all MIRA models!

Brighter workspace

The already well-lit work area has just become brighter with the addition of 2 more LED lights on the underside of the MIRA lid, right behind the handle. When the lid is opened, the 2 internal LEDs turn off, and the overhead light turns on to illuminate your workspace while reading material and using the camera. There is even a dimmer switch on the side of the machine to set the mood just right.

Status light

Aeon is known for its stylish and sleek appearance. The Aeon Laser logo on the front access door panel is now backlit and serves as a functional status light that shines white when in standby, red when there is a fault, and green while it is operating, adding both form and function to an already amazing design.

Intuitive LCD screen

The latest revision of the NOVA keyboard is now on its way to the MIRA Redline series, bringing commonly used features right to the surface for reduced setup times and overall user-friendliness. You can even monitor water temperature, current (mA), air pressure (psi), and the temperature of your optics directly from the vibrant 5" LCD display for the ultimate user experience.

Tool-free maintenance: Replacement of pipes

Say goodbye to meticulous tube replacements. This innovative approach allows you to swap tubes in and out of your Aeon laser without having to renegotiate the beam path. This means that it is now possible to have an extra tube on the shelf or quickly switch between higher or lower wattage tubes as needed.

Tool-free maintenance: Mirrors

All mirrors are now easily accessible and can be cleaned or replaced without the use of tools or having to recalibrate.

Toolless maintenance: Lens cartridges

The lens cartridges on all Redline models are now magnetic, and the focal lens itself is pressed with a silicone disc for easy access.

Proactive smart monitoring

The optics are now equipped with thermal sensors to detect and report temperature readings to the keyboard, thereby eliminating the likelihood of unexpected errors. This proactive approach not only saves you from costly errors and downtime, but also reduces the need for frequent unnecessary cleaning. To top it off, the controller now records these readings along with ambient temperature, the laser tube's runtime, and machine parameters, serving as a diagnostic log in case troubleshooting is necessary.

Secure guarded optics

To further reduce the need for maintenance, all optics have now been completely removed from the work area, bringing Clean Pack Design to its highest potential.

Surely protected laser head

With the laser head sealed, where no dust or dirt can penetrate, there are only a series of cost-effective windows that are much easier to maintain and replace if necessary.

Bullseye leveling gauge

Ensuring that your laser is level can now be done in a moment. Both MIRA and NOVA are equipped with Bullseye Leveling Gauges.

Features

Specs

Up to 8G acceleration

Full AC servo motors provide nearly instantaneous acceleration with 8G force and top speeds of 4,200 mm/sec across all RF models.

Excellent precision

Linear guide rails with ball bearings provide greater precision and smoother movements, which improves print quality and lifespan.

Lightweight laser head

A lightweight laser head contributes to less overscanning and a general reduction in vibrations.

Robust Unibody

Most lasers use a unibody structure where the components are bolted to a thin outer shell. However, if you require speed, it is extremely important to make the frame as rigid as possible to prevent the machine from bending. The frame in the Redline series is so robust that you can even remove the entire side panel for greater accessibility during troubleshooting.

All-in-one design

The MIRA series now joins the NOVAs with its Super Clean Pack design. Not only are the linear rails and rental blocks enclosed, but protective curtains on the left and right side rails now prevent unwanted particles from spreading into your workspace. Centrifugal fans have been replaced by quieter and easier-to-clean inline fans.

Modular pipe docking station

Quickly switch between tubes with higher or lower wattage as needed with the modular tube docking station. This tool-free design allows you to switch between different wavelengths on all models, such as 1064nm fiber lasers. This opens up a whole new world of possibilities by expanding the range of materials that can be processed while delivering results of the highest quality.

High resolution camera

All Aeon lasers are now equipped with built-in high-resolution cameras for precise positioning and monitoring.

Integrated autofocus

Say goodbye to collisions and hollowed-out material. The Aeon Redline series features a redesigned laser head with integrated autofocus.

Material passes through

For the Redline series, the design team was finally able to include an endless front-to-back review in all MIRA models!

Brighter workspace

The already well-lit work area has just become brighter with the addition of 2 more LED lights on the underside of the MIRA lid, right behind the handle. When the lid is opened, the 2 internal LEDs turn off, and the overhead light turns on to illuminate your workspace while reading material and using the camera. There is even a dimmer switch on the side of the machine to set the mood just right.

Status light

Aeon is known for its stylish and sleek appearance. The Aeon Laser logo on the front access door panel is now backlit and serves as a functional status light that shines white when in standby, red when there is a fault, and green while it is operating, adding both form and function to an already amazing design.

Intuitive LCD screen

The latest revision of the NOVA keyboard is now on its way to the MIRA Redline series, bringing commonly used features right to the surface for reduced setup times and overall user-friendliness. You can even monitor water temperature, current (mA), air pressure (psi), and the temperature of your optics directly from the vibrant 5" LCD display for the ultimate user experience.

Tool-free maintenance: Replacement of pipes

Say goodbye to meticulous tube replacements. This innovative approach allows you to swap tubes in and out of your Aeon laser without having to renegotiate the beam path. This means that it is now possible to have an extra tube on the shelf or quickly switch between higher or lower wattage tubes as needed.

Tool-free maintenance: Mirrors

All mirrors are now easily accessible and can be cleaned or replaced without the use of tools or having to recalibrate.

Toolless maintenance: Lens cartridges

The lens cartridges on all Redline models are now magnetic, and the focal lens itself is pressed with a silicone disc for easy access.

Proactive smart monitoring

The optics are now equipped with thermal sensors to detect and report temperature readings to the keyboard, thereby eliminating the likelihood of unexpected errors. This proactive approach not only saves you from costly errors and downtime, but also reduces the need for frequent unnecessary cleaning. To top it off, the controller now records these readings along with ambient temperature, the laser tube's runtime, and machine parameters, serving as a diagnostic log in case troubleshooting is necessary.

Secure guarded optics

To further reduce the need for maintenance, all optics have now been completely removed from the work area, bringing Clean Pack Design to its highest potential.

Surely protected laser head

With the laser head sealed, where no dust or dirt can penetrate, there are only a series of cost-effective windows that are much easier to maintain and replace if necessary.

Bullseye leveling gauge

Ensuring that your laser is level can now be done in a moment. Both MIRA and NOVA are equipped with Bullseye Leveling Gauges.

Features

Specs

Up to 8G acceleration

Full AC servo motors provide nearly instantaneous acceleration with 8G force and top speeds of 4,200 mm/sec across all RF models.

Excellent precision

Linear guide rails with ball bearings provide greater precision and smoother movements, which improves print quality and lifespan.

Lightweight laser head

A lightweight laser head contributes to less overscanning and a general reduction in vibrations.

Robust Unibody

Most lasers use a unibody structure where the components are bolted to a thin outer shell. However, if you require speed, it is extremely important to make the frame as rigid as possible to prevent the machine from bending. The frame in the Redline series is so robust that you can even remove the entire side panel for greater accessibility during troubleshooting.

All-in-one design

The MIRA series now joins the NOVAs with its Super Clean Pack design. Not only are the linear rails and rental blocks enclosed, but protective curtains on the left and right side rails now prevent unwanted particles from spreading into your workspace. Centrifugal fans have been replaced by quieter and easier-to-clean inline fans.

Modular pipe docking station

Quickly switch between tubes with higher or lower wattage as needed with the modular tube docking station. This tool-free design allows you to switch between different wavelengths on all models, such as 1064nm fiber lasers. This opens up a whole new world of possibilities by expanding the range of materials that can be processed while delivering results of the highest quality.

High resolution camera

All Aeon lasers are now equipped with built-in high-resolution cameras for precise positioning and monitoring.

Integrated autofocus

Say goodbye to collisions and hollowed-out material. The Aeon Redline series features a redesigned laser head with integrated autofocus.

Material passes through

For the Redline series, the design team was finally able to include an endless front-to-back review in all MIRA models!

Brighter workspace

The already well-lit work area has just become brighter with the addition of 2 more LED lights on the underside of the MIRA lid, right behind the handle. When the lid is opened, the 2 internal LEDs turn off, and the overhead light turns on to illuminate your workspace while reading material and using the camera. There is even a dimmer switch on the side of the machine to set the mood just right.

Status light

Aeon is known for its stylish and sleek appearance. The Aeon Laser logo on the front access door panel is now backlit and serves as a functional status light that shines white when in standby, red when there is a fault, and green while it is operating, adding both form and function to an already amazing design.

Intuitive LCD screen

The latest revision of the NOVA keyboard is now on its way to the MIRA Redline series, bringing commonly used features right to the surface for reduced setup times and overall user-friendliness. You can even monitor water temperature, current (mA), air pressure (psi), and the temperature of your optics directly from the vibrant 5" LCD display for the ultimate user experience.

Tool-free maintenance: Replacement of pipes

Say goodbye to meticulous tube replacements. This innovative approach allows you to swap tubes in and out of your Aeon laser without having to renegotiate the beam path. This means that it is now possible to have an extra tube on the shelf or quickly switch between higher or lower wattage tubes as needed.

Tool-free maintenance: Mirrors

All mirrors are now easily accessible and can be cleaned or replaced without the use of tools or having to recalibrate.

Toolless maintenance: Lens cartridges

The lens cartridges on all Redline models are now magnetic, and the focal lens itself is pressed with a silicone disc for easy access.

Proactive smart monitoring

The optics are now equipped with thermal sensors to detect and report temperature readings to the keyboard, thereby eliminating the likelihood of unexpected errors. This proactive approach not only saves you from costly errors and downtime, but also reduces the need for frequent unnecessary cleaning. To top it off, the controller now records these readings along with ambient temperature, the laser tube's runtime, and machine parameters, serving as a diagnostic log in case troubleshooting is necessary.

Secure guarded optics

To further reduce the need for maintenance, all optics have now been completely removed from the work area, bringing Clean Pack Design to its highest potential.

Surely protected laser head

With the laser head sealed, where no dust or dirt can penetrate, there are only a series of cost-effective windows that are much easier to maintain and replace if necessary.

Bullseye leveling gauge

Ensuring that your laser is level can now be done in a moment. Both MIRA and NOVA are equipped with Bullseye Leveling Gauges.

Features

Specs

Up to 8G acceleration

Full AC servo motors provide nearly instantaneous acceleration with 8G force and top speeds of 4,200 mm/sec across all RF models.

Excellent precision

Linear guide rails with ball bearings provide greater precision and smoother movements, which improves print quality and lifespan.

Lightweight laser head

A lightweight laser head contributes to less overscanning and a general reduction in vibrations.

Robust Unibody

Most lasers use a unibody structure where the components are bolted to a thin outer shell. However, if you require speed, it is extremely important to make the frame as rigid as possible to prevent the machine from bending. The frame in the Redline series is so robust that you can even remove the entire side panel for greater accessibility during troubleshooting.

All-in-one design

The MIRA series now joins the NOVAs with its Super Clean Pack design. Not only are the linear rails and rental blocks enclosed, but protective curtains on the left and right side rails now prevent unwanted particles from spreading into your workspace. Centrifugal fans have been replaced by quieter and easier-to-clean inline fans.

Modular pipe docking station

Quickly switch between tubes with higher or lower wattage as needed with the modular tube docking station. This tool-free design allows you to switch between different wavelengths on all models, such as 1064nm fiber lasers. This opens up a whole new world of possibilities by expanding the range of materials that can be processed while delivering results of the highest quality.

High resolution camera

All Aeon lasers are now equipped with built-in high-resolution cameras for precise positioning and monitoring.

Integrated autofocus

Say goodbye to collisions and hollowed-out material. The Aeon Redline series features a redesigned laser head with integrated autofocus.

Material passes through

For the Redline series, the design team was finally able to include an endless front-to-back review in all MIRA models!

Brighter workspace

The already well-lit work area has just become brighter with the addition of 2 more LED lights on the underside of the MIRA lid, right behind the handle. When the lid is opened, the 2 internal LEDs turn off, and the overhead light turns on to illuminate your workspace while reading material and using the camera. There is even a dimmer switch on the side of the machine to set the mood just right.

Status light

Aeon is known for its stylish and sleek appearance. The Aeon Laser logo on the front access door panel is now backlit and serves as a functional status light that shines white when in standby, red when there is a fault, and green while it is operating, adding both form and function to an already amazing design.

Intuitive LCD screen

The latest revision of the NOVA keyboard is now on its way to the MIRA Redline series, bringing commonly used features right to the surface for reduced setup times and overall user-friendliness. You can even monitor water temperature, current (mA), air pressure (psi), and the temperature of your optics directly from the vibrant 5" LCD display for the ultimate user experience.

Tool-free maintenance: Replacement of pipes

Say goodbye to meticulous tube replacements. This innovative approach allows you to swap tubes in and out of your Aeon laser without having to renegotiate the beam path. This means that it is now possible to have an extra tube on the shelf or quickly switch between higher or lower wattage tubes as needed.

Tool-free maintenance: Mirrors

All mirrors are now easily accessible and can be cleaned or replaced without the use of tools or having to recalibrate.

Toolless maintenance: Lens cartridges

The lens cartridges on all Redline models are now magnetic, and the focal lens itself is pressed with a silicone disc for easy access.

Proactive smart monitoring

The optics are now equipped with thermal sensors to detect and report temperature readings to the keyboard, thereby eliminating the likelihood of unexpected errors. This proactive approach not only saves you from costly errors and downtime, but also reduces the need for frequent unnecessary cleaning. To top it off, the controller now records these readings along with ambient temperature, the laser tube's runtime, and machine parameters, serving as a diagnostic log in case troubleshooting is necessary.

Secure guarded optics

To further reduce the need for maintenance, all optics have now been completely removed from the work area, bringing Clean Pack Design to its highest potential.

Surely protected laser head

With the laser head sealed, where no dust or dirt can penetrate, there are only a series of cost-effective windows that are much easier to maintain and replace if necessary.

Bullseye leveling gauge

Ensuring that your laser is level can now be done in a moment. Both MIRA and NOVA are equipped with Bullseye Leveling Gauges.

Klar til at starte din laserrejse?

Vi står klar til at hjælpe dig på vej.

Klar til at starte din laserrejse?

Vi står klar til at hjælpe dig på vej.

Alt hvad du behøver til dit makerspace. Vi har mange års erfaring og er specialiserede i laserskærerer. Gratis og ubegrænset teknisk support til danske kunder. Autoriseret Aeon forhandler.

Kontaktoplysninger

Betamachines

Strandhuse 24



5762 Vester Skerninge

Alt hvad du behøver til dit makerspace. Vi har mange års erfaring og er specialiserede i laserskærerer. Gratis og ubegrænset teknisk support til danske kunder. Autoriseret Aeon forhandler.

Kontaktoplysninger

Betamachines

Strandhuse 24



5762 Vester Skerninge

Alt hvad du behøver til dit makerspace. Vi har mange års erfaring og er specialiserede i laserskærerer. Gratis og ubegrænset teknisk support til danske kunder. Autoriseret Aeon forhandler.

Kontaktoplysninger

Betamachines

Strandhuse 24



5762 Vester Skerninge

Alt hvad du behøver til dit makerspace. Vi har mange års erfaring og er specialiserede i laserskærerer. Gratis og ubegrænset teknisk support til danske kunder. Autoriseret Aeon forhandler.

Kontaktoplysninger

Betamachines

Strandhuse 24



5762 Vester Skerninge